Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ccme, call-forward with sip

Hi

im running callmanager express 4.1 with sip trunk to ITSP.

now the provider complaint that i was calling out with numbers that where not mine, and that screw up his billing on me so hi threaten to shut my account down... I discovered that it did so when i call-forward to an external number like my cellphone, it uses the callers nr and make a call with that to my cell. I solved this by making a tranlation rule that makes all outgoing numbers transate to one of mine numbers.

and now i wonder if this can be made in a other better way, without the translation rule?

Grateful for any help!

//Kristoffer

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: ccme, call-forward with sip

Translation-rule is the proper way. And your ITSP should learn something from traditional telcos. If you call with the correct or wrong number, be sure you are billed anyway :)

3 REPLIES
Hall of Fame Super Gold

Re: ccme, call-forward with sip

Translation-rule is the proper way. And your ITSP should learn something from traditional telcos. If you call with the correct or wrong number, be sure you are billed anyway :)

New Member

Re: ccme, call-forward with sip

yeah I thought so to, but am new at this telephony stuff so i didn?t want to argue... :)

Hall of Fame Super Gold

Re: ccme, call-forward with sip

When I've answered before I must have a been a little sleepy. There is an easier way: configure "clid" under DP.

Thanks for the nice rating and good luck!

112
Views
3
Helpful
3
Replies