Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ccme call hunting sequence wrong

hi all,

we have CCME. the actual hunting sequence of our main line does not match our configuration on the IP phone Call Manager.

!
voice translation-rule 200
rule 1 /2701/ /17562700/
rule 2 /2780/ /17562700/
rule 3 /2702/ /17562700/
rule 4 /2703/ /17562700/
rule 7 /2/ /17562/
!


!
ephone-hunt 1 peer
pilot 2700 secondary 17562700
list 2701, 2780, 2702, 2783, 2703, 2784, 2704, 2785, 2782, 2786
final 9700
preference 1
timeout 120, 120, 120, 120, 120, 120, 120, 120, 120, 120
no-reg
!

When people call our main line 17562700, 2701 should ring first then if the call is not answered, it should jump to 2780, and so on. But in the real situation this is not the case, and 2780 always ring first.

Could any help out please ....

1 REPLY
Hall of Fame Super Gold

Re: ccme call hunting sequence wrong

Check "show ephone-hunt 1", 2701 may be down or logged out.

Note that with 2 minutes of ring time, any caller will have hang up already before it goes to next in list.

149
Views
0
Helpful
1
Replies