Cisco Unified IP Phones have two default ring types: Chirp1 and Chirp2. Cisco Unified CME also supports custom ring tones using pulse code modulation (PCM) files. An XML file called RingList.xml specifies the ring tone options available for the default ring on an IP phone registered to Cisco Unified CME. An XML file called DistinctiveRingList.xml specifies the ring tones available on each individual line appearance on an IP phone registered to Cisco Unified CME.
1. Create a PCM file for each custom ring tone.
2. Edit the RingList.xml and DistinctiveRingList.xml files using an ASCII editor.
3. Copy the PCM and XML files to system Flash on the Cisco Unified CME router.
4. Use the tftp-server command to enable access to the files.
The problem is that as I mentioned, the phones are not making tftp request for these files like the 7912 and 7940 that I've configured before. Here is the output from debug tftp event when I reset a 7911 and 7941 in sequence.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...