Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CCME converting SIP to SCCP

Hello,

I have a 2811 router that has CME 4.1 archived on. SCCP phones register fine, but there is a 7960 phone that was previously used as SIP.

How can I convert this SIP phone to SCCP and register with CCME?

Thanks

3 REPLIES
Hall of Fame Super Gold

Re: CCME converting SIP to SCCP

For a 7960, just configure an ephone with corresponding mac-address and type and load under telephony service. Make sure you have all the SCCP files correctly configured with "tftp-server". That should be enough to upgrade the phone.

Hope this helps, please rate post if it does!

New Member

Re: CCME converting SIP to SCCP

I have tftp configured will all the files, but it is still not picking up the sccp load.

Hall of Fame Super Gold

Re: CCME converting SIP to SCCP

Also configure an ephone with correct mac-address and type.

If still no go, collect "debug tftp events" with "term mon".

126
Views
0
Helpful
3
Replies
CreatePlease to create content