Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCME COR help

hi guys,

Brief objective: Outgoing calls "Everyone will use Line 1 FXO, certain ppl will use Line2 FXO

Tech Objective 1

  • "Everyone" ext 111, ext 112 outgoing call, dial out from port0/0/0(line1)
  • "Certain ppl" ext 113, ext 114 outgoing call, dial out from port0/0/1(line2-priority), if line 2 is busy, they can use line 1

Tech Objective 2

  • ext 111 & ext 113 can call International
  • ext 112 & ext 114 local call only

Partitions

CCS

Ephone Directory

Dial-peer cor custom

Name Local-line1

Name Intl-line1

Name Local-line2

Name Intl-line2

Dial-peer cor list outbound-intl-line1

Member Local-line1

Member Intl-line1

Dial-peer cor list outbound-NOintl-line1

Member Local-line1

Dial-peer cor list outbound-intl-line2

Member Local-line2

Member Intl-line2

Dial-peer cor list outbound-NOintl-line2

Member Local-line2

Ephone-dn 1

Number 111

Cor incoming outbound-intl-line1

Ephone-dn 2

Number 112

Cor incoming outbound-NOintl-line1

Ephone-dn 3

Number 113

Cor incoming outbound-intl-line2

Ephone-dn 4

Number 114

Cor incoming outbound-NOintl-line2

Dial-peer cor list call-local-line1

Member Local-line1

Dial-peer cor list call-intl-line1

Member Intl-line1

Dial-peer cor list call-local-line2

Member Local-line2

Dial-peer cor list call-intl-line2

Member Intl-line2

POTS

Dial-peer voice 10 pots

Destination pattern 9888   //simulate local   call

Port 0/0/0

Cor outgoing call-local-line1

Dial-peer voice 100 pots

Destination pattern 9888 //simulate local call

Port 0/0/1

Cor outgoing call-local-line2

Dial-peer voice 11 pots

Destination pattern 9999 //simulate international   call

Port 0/0/0

Cor outgoing call-intl-line1

Dial-peer voice 111 pots

Destination pattern 9999   //simulate international   call

Port 0/0/1

Cor outgoing call-intl-line2

Above is my config, however i am not able to achieve the priority of Line 2 & Line 1 for Ext 113 and 114,

I am not too sure how to piece it together when i am not able to group voice POTS

Appreciate any advise

105
Views
0
Helpful
0
Replies
CreatePlease to create content