Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CCME GPickup

Dear All,

I am running CCME 4.2. I only want to dial one extension number to receive group pickup for a number to extensions.

Regards,

Malik

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CCME GPickup

Hi Malik,

You will need to configure the pickup-group command under all your ephone-dns.

For example:

ephone-dn 1 dual-line

pickup-group 30

ephone-dn 2 dual-line

pickup-group 30

ephone-dn 3 dual-line

pickup-group 30

...

ephone-dn dual-line

pickup-group 30

Then you can pickup any call ringing at any phone from any other.

Hope it helps!

Best regards,

- Adrián.

6 REPLIES

Re: CCME GPickup

Hi Malik,

Here is the link to CME PickUp feature:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1092675

Hope it helps you!.

Best regards,

- Adrián.

Community Member

Re: CCME GPickup

thanks for your response...i will configure it and if there is any issue i will let you know...

Community Member

Re: CCME GPickup

Can anybody tell me how i can configure

"Call Pickup, a Single Group for All Cisco CME Phones"

Regards,

Malik.

Re: CCME GPickup

Hi Malik,

You will need to configure the pickup-group command under all your ephone-dns.

For example:

ephone-dn 1 dual-line

pickup-group 30

ephone-dn 2 dual-line

pickup-group 30

ephone-dn 3 dual-line

pickup-group 30

...

ephone-dn dual-line

pickup-group 30

Then you can pickup any call ringing at any phone from any other.

Hope it helps!

Best regards,

- Adrián.

Community Member

Re: CCME GPickup

GREAT!!!!Thanks Mr. Adria. Really appreciate your support....

Regards,

Malik...

Re: CCME GPickup

Hey Malik,

You're welcome! :)

Glad to help a bit!

- Adrián.

219
Views
5
Helpful
6
Replies
CreatePlease to create content