cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
4
Helpful
8
Replies

CCME speed-dial not working

thejas.ramadas
Level 1
Level 1

Hi

I have a problem here, I configured speed dial on one extension after some time speed dial is not working

CME version is 4.2 and IP Phone is 7970

Plz give me solution for the above problem..

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

Which exact IOS are you running, and which exact phone FW ?

hi

here i am using ios version 12.4 and the phone firmware is SCCP70.8-2-2SR2S

Hi, "12.4" is not exact version, please copy and paste from "show version".

Hi

IOS Version is 12.4(11)XW1

Hi, please upgrade to 12.4(11)XW6 and the phones to 8.2(2)SR4, and you should be OK.

Hi, I am encountering the same problem. I upgraded the CCME IOS and 7970 firmware as per your suggestions. However I am getting the same problem, that it the speed dial buttions are still not working. Any other sugestions.

Chandrasen

Hello! I have the same problem with 7911 phone. The CCME version is 4.1(0), the IOS is "c2800nm-spservicesk9-mz.124-15.T1.bin" and 7911 firmware is SCCP11.8-2-2SR1S.

Did you understand why this happens in 7970?

Thank you

Hi Pedro,

The only way we managed to make it work was that at the end of each speed number stored, we added a #. This had to be done for all users unfortunately.

Chandrasen

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: