I´m working with CUCM 7.1 and i need to implement 30 Cisco 3905 phones. Cisco sent me 30 CDs (Includes License and Warranty) and i want to know the procedure. The 3905 phones work with SIP protocol. I loaded licences last semester in CUCM 7.1 (OS Administrator/Software Upgraders/TFTP File Management/Upload File)
What should i do in this new case?
Should i go to CUCM web administrator and run each CD (30 times)?
Licenses are delivered via Product Authorization Key (PAK) which is just a number you register via cisco.com/go/license after which you receive an email that you apply to your CUCM, CCME-UL-3905 is license for CallManager express not CUCM, so that is no use to you, except you can use those interchangeably as SRST licenses if you need those. For CUCM you need to purchase proper user licenses.
We bought necessary licenses but we received from Cisco 30 units CD. Each CD says in its surface "Includes License and Warranty". Each CD has files and folders: autorun.pro, css, etc). Cisco didn´t send me the PAK.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...