I would like your assistance regarding CCME . I am using 2811 with (Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(11)T1) ,
I have a problem . when internal users calls to operator phone (7970) it displays only three question marks (???). but when operator pick the phone phone can diplay user name on screen. all internal users can easily see caller name on there screen or on phone display.
It was working fine before updating my new ios .
kindly tell me why three question mark on operator (??? ). how can i able to correct this problem. I am attaching show ver , show run ,show flash
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...