Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CCME with SIP and SCCP

Hi All,

I have a customer who is running SCCP in the switchboard operator 7960 Cisco IP phone.The rest of the phones are Snom phones running SIP.The ver of CCME IOS installed in the Cisco router is:

c3825-ipvoicek9-mz.124-15.T1.bin.

My customer wants to achieve this:

To install 2 x 7914 on the operator's 7960 phone and be able to configure shared lines with directory numbers on the SIP phones. Basically the operator wants to see the busy extensions on the Snom SIP phones from her 7960 with 7914's. How can I achieve this.

You help in this regard is very much apreciated.

Thank you in advance.

Sibusiso.

1 REPLY
Silver

Re: CCME with SIP and SCCP

You can share lines between a SIP and SCCP phone on the CallManager. However, the same is not true on CallManager Express. You can have SIP and SCCP phones but they can not share lines. Following link may help you

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme34spc.html

124
Views
0
Helpful
1
Replies