Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ccme

How i can add the prefix to the below config for sending the sip cals to the other ccme

i need a prefix 6 and the number

dial-peer voice 800 voip

destination-pattern 9...

session protocol sipv2

session target ipv4:10.101.1.5

session transport tcp

dtmf-relay rtp-nte

codec g711ulaw

no vad

I am waiting for your valubale reply.

Thanks in advance

2 REPLIES
New Member

Re: ccme

hello,

have you tried the prefix command into the dial-peer

I think that it must work for your case.

New Member

Re: ccme

You could also use a translation profile:

voice-translation rule 101

rule 1 /^9\(.*\)/ /69\1/

voice translation-profile PREFIX6

translate called 101

dial-peer voice 800 voip

translation-profile outgoing PREFIX6

111
Views
0
Helpful
2
Replies