<br /><br />I'm starting to prepare a lab for my CCNA Voice and eventually CCVP and was trying to come up with a simple but full lab topology for this. I have been using GNS3 but with the limitations of not having CUE is not fulfilling the requirements.
<br /><br />My first thought is to have 2x2800 series routers with CME and CUE connected through T1 cards with a pri crossover cable with some FXO/FXS and ATA's.
<br /><br />Do anyone have any suggestions on this lab?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...