Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CDR at 9.1.1 CUCM and origMediaTransportAddress_IP


we collect CDR from CUCM 9.1.1 to send it to a analysis software.

Normally the field in CDR named origMediaTransportAddress_IP are filled with the gateway IP address if calls come from PSTN. In our case there is always as IP address so that the analysis software cant analyze this call.

At internal calls this field is correct filled with the IP from the called or calling party ip phone.

Is it possible to set any command in IOS at the gateway to fill this field with the correct value? The gateway is configured as MGCP. Is it possible to configure some at the CUCM to get the right IP in CDR field? Or is this a bug?

The IOS at gateway is 15.2(4)M3, file is c2900-universalk9-mz.SPA.152-4.M3.bin.