I currently have cdr working my cdr records show a 5 digit extension which is correct. I am wondering if there is a way to manipulate/translate my 5 digit extentions to show a full 10 diget for calling number in CDR?
If you can get your CDR out and can process it externaly with something then your set. Right now we use a php script to pull CDR data and then use a if statment to look for ranges of ext and then rewrite the ext as 10 digit when there is a match. We do this because our billing package only uses 10-digit. If you have any questions let me know.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...