I am trying to pull the CDR from CUCM and I found that the below services are activated. But the service in system parameter is false in both the nodes. If I make that service as true whether that will help me to pull the CDR for previous calls, like the records for past 4 months?
No - when you run on the CDR service parameter, the node you set the parameter for starts to collect CDR in text files. If you don't have it turned on the CDRs are never collected, so the data is lost.
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...