cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
533
Views
0
Helpful
2
Replies

CDR not logging phone calls.

Mike Bowers
Level 1
Level 1

Hello, I'm just getting into Voice and trying to save Call Detail Records to the buffer of a 2800 series router running CME 8.6 with two 7940 ip phones.

I have CME set up and I'm placing a call and connecting between two extensions after following the book example to set CDR up.

 

Basically, the book example just shows the following commands:

 

logging buffered 512000

dial-control-mib retain-timer 10080

dial-control-mib max-size 700

 

 

Then, when I Place a call between two phones I have set up and answer the call. I check the logs(show logging) and no CDR info is logged like the pictures show. This is getting very frustrating but appears like it should be very easy to set up.

 

Is there something I am missing?

 

 

1 Accepted Solution

Accepted Solutions

Dear, Please refer below link, it must work.

http://www.cisco.com/c/en/us/support/docs/voice/h323/14068-cdr-logging.html

Suresh

View solution in original post

2 Replies 2

Mike Bowers
Level 1
Level 1

Is there more to the CDR configuration than the above?  We're trying to track down who's been accidentally dialing 911 and I'm puzzled as to why CDR is not logging anything in the buffer when I try to test.

Dear, Please refer below link, it must work.

http://www.cisco.com/c/en/us/support/docs/voice/h323/14068-cdr-logging.html

Suresh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: