Login to CAR as Administrator. Go to CDR->Search->'any criterion', for which
the output is a group of CDRs.Now click on the Send Report button and e-mail this report to any valid recipient. The CDRs reach the recipient in a completely jumbled manner, making it impossible to understand. Further, there is no choice for sending the same in pdf format.
Check this workaround:
Use the following steps to display data in Excel in a meaningful format.
1. start MS Excel
2. choose File->Open
3. select "Text Files (*.pm; *.txt, *.csv)" for Files of type
4. find and open the report txt file
5. in Text Import Wizard window - Step 1 or 3,
choose "Fixed width" as file type, (it turned out choosing "Delimited"
may result in truncation of data)
6. in Text Import Wizard window - Step 2 or 3,
use horizonal scroll bar to go over the entire row,
delete unwanted column break by double click
add missing column break by single click at the desired position
7. in Text Import Wizard window - Step 3 or 3,
8. data will be displayed in Exel cells.
9. for better readability, adjust the alignment, select the whole table
by clicking the table's upper-left corner, and click left-alignment button
on the tool bar. To make cell width fit data length automatically, double
click between any two columns at the top bar (A,B,C,...) while the whole
table is selected.
10.save the table to a Excel file
If you find this post helpful, please rate! :)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...