CER 2.0(3) Not tracking phones after upgrade from 1.3(2)
After i upgraded from CER 1.3(2) to CER 2.0(3) the new version of CER is not tracking any of my phones registered with call manager even i run manual switch port and phone descovery it will not find discover any phones. I checked the SNMP string on the CER publisher the call manager publisher and subcribers nodes in the cluster as well as runa debug snmp packets on a switch that i can ping from the CER plublisher. i notice that that SNMP is sending packets to the CER server but i'm still not tracking any phones on CER 2.0(3). if i do switch port details search for a particular switch i see the switch and port, ip address zone, but no phone extension or phone ip address or phone type. this was un upgrade from 1.3(2) to 2.0(3) tracking was working before the upgrade but not after. no errors or warning were encounter during the DMA export or import. any help of suggestiong will be greatly appriciated.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...