Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CFA to PSTN, how to release the call from gateway?

-CUCM6.1

-SRST router with FXO lines. h323

Under voice-port, configure the target number '91800xxxyyyy' and let the incoming call back to PSTN

Q)is there any feature to release the call from SRST router?

Thanks in advance,

3 REPLIES
Hall of Fame Super Gold

Re: CFA to PSTN, how to release the call from gateway?

Short of shut/no shut the voice-port, there's no way. There is also a"clear voice call" command, but it's broken in most IOS versions.

New Member

Re: CFA to PSTN, how to release the call from gateway?

I may not explained clearly.

the incoming call forwarded to 1800 (PSTN) in SRST router but the call still stay in SRST router until hang-up and also occupy two FXO lines.

Is there any way to release from SRST router after the incoming call forwared to 1800(PSTN)?

Thanks,

John

Hall of Fame Super Gold

Re: CFA to PSTN, how to release the call from gateway?

If you configure CFA at router level, it is normal that each call will take two lines.

If you want CFA not to take any line, configure it at telco level.

131
Views
0
Helpful
3
Replies
CreatePlease to create content