Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CFwdAll Override from a non-target DN...

I understand the CFwdAll override from the target DN back to the originator, but we require other DN's to be able to override back to the one originator.

We have migrated old iSDX analogue phones to CUCM, the iSDX allowed non-target DN's to transfer a call to the originator (CFwdAll) by granting the DN(s) the DES (Direct Extension Selection) Class-of-service parameter.

This allowed us to set up a group of DN's who could pick up the call for the target DN of the CFwdAll DN, then transfer the call back to the CFwdAll DN on behalf of the target DN.

Is there some kind of work around to create this set up, it may involve CSS or Partitions or both?


Super Bronze

Re: CFwdAll Override from a non-target DN...


You guessed it - the only way around this that I'm aware of is to create a duplicate DN of the source (i.e. CFwdAll'd) DN, which is not set to CFwdAll, in a new partition.

The users that would be able to reach the CFwdAll'd user would then need to have the new partition in their CSS, while all other users would only have the standard partition containing the forwarded user.

Could become a bit of a pain to administer if this is a common requirement.



Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!