Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

change after 3 ring forward

Dears,

I have call manager v 6.1 and the customer need change after 3 ring forward to mobile  . and i try the "No Answer Ring Duration (seconds)" not respons only after 5 ring go to mobile

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: change after 3 ring forward

Hi Mohammed,

Did you set this under service parameters (Clusterwide Parameters (Feature-Forward)

# of seconds? If so you might you'll need to look under the specified phone Device > DN > Page to make sure

this hasn't been set @ the Line level which will override the System-wide setting.

No Answer Ring Duration (seconds)

#

Used in conjunction with Call Forward No Answer Destination, this field sets the timer for how long the phone will ring before it gets forwarded. Leave this setting blank to use the value that is set in the Cisco CallManager service parameter, Forward No Answer Timer.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b03dn.html#wp1245287

Cheers!

Rob

PS: for 3 rings I would try 12 seconds

5 REPLIES
Hall of Fame Super Red

Re: change after 3 ring forward

Hi Mohammed,

Did you set this under service parameters (Clusterwide Parameters (Feature-Forward)

# of seconds? If so you might you'll need to look under the specified phone Device > DN > Page to make sure

this hasn't been set @ the Line level which will override the System-wide setting.

No Answer Ring Duration (seconds)

#

Used in conjunction with Call Forward No Answer Destination, this field sets the timer for how long the phone will ring before it gets forwarded. Leave this setting blank to use the value that is set in the Cisco CallManager service parameter, Forward No Answer Timer.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b03dn.html#wp1245287

Cheers!

Rob

PS: for 3 rings I would try 12 seconds

Hall of Fame Super Silver

change after 3 ring forward

As Rob mentions this can be set either globally via service parameter, or you can overwrite it at the DN level. "+5" for detailed instructions.

Each ting cycle in North America is 4 seconds, this varies from country to country.

Chris

Green

Re: change after 3 ring forward

Hi,

Just to add to the info from Rob (+5)

The length of the ringing cycle is depenant upn the cadence for your country

Here in the UK we ring :-

From BT SIN 351 - http://www.sinet.bt.com/351v4p5.pdf

So BRING,BRING---------BRING,BRING -------- BRING,BRING

One BRING,BRING-------

0.4S ON- 0.2S OFF - 0.4 S ON - 2S OFF

So ONE ring cycle = 3 Seconds

Regards

Alex

Regards, Alex. Please rate useful posts.
New Member

Re: change after 3 ring forward

First thaks for all

hi Mr rob.huffman itry

No Answer Ring Duration (seconds) option

but no change an ything still untel now after 5 ring forward to mobile

Hall of Fame Super Silver

Re: change after 3 ring forward

Is it total 5 ring cycles before the call rings on the mobile phone? Keep in mind that you have to account for your telco call setup time plus the mobile carrier setup time which can add few seconds to it.

Sent from Cisco Technical Support iPhone App

2193
Views
10
Helpful
5
Replies