Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

change Calling number in SRST

Hi

I have configured SRST and Phones are getting registered succesfully. For SRST phones need to make outgoing calls via E1 and should change the calling number, i tried using translation rule. but in debugs number is not translated. dial-peer and translation rule config is attached. 

can anyone help to changed calling number in SRST ?

voice translation-rule 10

rule 1 /.*/ /0472031700/

!

!

voice translation-profile SRST

translate calling 10

!

dial-peer voice 100 pots

description #### Outgoing for SRST ####

translation-profile outgoing SRST

destination-pattern T

direct-inward-dial

port 0/1/0:15

forward-digits all

Regds

$

  • IP Telephony
Everyone's tags (2)
1 REPLY

Re: change Calling number in SRST

What is your output for the following command on the voice gateway?

test voice translation-rule 10 (type in the calling number here)

this is what I get with your config.

test voice translation-rule 10 4082022001

Matched with rule 1

Original number: 4082022001     Translated number: 0472031700

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

doesn't it show on the external phone like this or are you purley looking at the debug isdn q931?

Voice CCIE #37771
186
Views
5
Helpful
1
Replies
This widget could not be displayed.