Hello guys i bought a cisco ATA 186 for my home lab and i have tried to register it to callmanager 7x without success. I have added it as an ata186, and also tried to do it by turning on auto registration and adding the callmanager ip address to as the ATA’s tftp ip address but i am not seeing it as registered. But I thought i may be having problems due to the fact that ATA has sip protocol running on it. So now i want to change it to sccp but i have not understood the guides i’ve found very clearly.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...