Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Change Digit Dialing

Hi All

I work for a company that just purchased, another company in NY and the NY office does 6 digit dialing and we are in TX and we do 5 digit dialing.

What I want to know is what do I need to modify to give us an additional ditgit so that we can do 6 digit dialing and we can dial them and they

can dial us.And is there a way that even though we are going to add an additional digit is there a way that we can still do the 5 digit dialing in our
office here in TX and only do the 6 digit when we call NY or can this even be done.Thanks in advance for the help and have a great day.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Change Digit Dialing

You can strip digits in CUCM for inbound/outbound calls assuming their end is not capable of doing so.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
7 REPLIES
Cisco Employee

Change Digit Dialing

Is this CUCM?? CME??

Same cluster? different clusters/CMEs??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Change Digit Dialing

What is your IP Telephony Solution?

Like Jaime asked, CUCME, CUCM......?

Regards

New Member

Change Digit Dialing

We just upgraded to CUCM 8.6

Cisco Employee

Re: Change Digit Dialing

Still more info is required, but in any case, you can just configure site code dialing using a 1 or 2 digit prefix for each site and then keep local site dialing intact.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Change Digit Dialing

From CUCM you can use a translation-pattern, but can you give us a more detailed information. Like

NY dials xxxxx to TX

TX dials yyyyyy to NY

Thanks

New Member

Change Digit Dialing

NY dials 972 536-XXXX to TX

TX dials 646 344-XXXX to NY

and like right now I dial 2XXXX to get someone in the office or any regional office.

But the other company dials 46XXXX to get someone in there office and they want

to add the other digit to our end so that we can all be the same.But this is another

question also.We use CUCM and they use Asterick can this still be done even if

they don't have what we have for call management?

Cisco Employee

Change Digit Dialing

You can strip digits in CUCM for inbound/outbound calls assuming their end is not capable of doing so.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
226
Views
0
Helpful
7
Replies