cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
542
Views
0
Helpful
5
Replies

Changing CUCM IP address on Presence server

Daniel Gomez
Level 1
Level 1

Hello,

Does anybody know if there's any guide showing the procedure to change CUCM IP address on a presence server.

CUCM IP address has to change and therefore we need to change it on presence server.

Regards,

Sent from Cisco Technical Support iPhone App

1 Accepted Solution

Accepted Solutions

Correct, simply change all configuration pointing to old CUCM, i.e. presence GW, TFTP, etc.

HTH,

Chris

View solution in original post

5 Replies 5

Aman Soi
VIP Alumni
VIP Alumni

Hi Daniel,

What are the versions u are using for CUCM and CUPS?

regds,

aman

We are using CUCM 8.6.2 and Presence 8.6.4.

Just to confirm, I don't want to change the IP address of the presence server itself, what I need to do is to change the IP address of CUCM configured on this presence server, I mean, it will affect the current integration.

I assume I would need to change gateway, TFTP, etc. but I just want to make sure I do it the right way so I don't cause any DB issues or something worse.

Sent from Cisco Technical Support iPhone App

Correct, simply change all configuration pointing to old CUCM, i.e. presence GW, TFTP, etc.

HTH,

Chris

Thank you Chris,

I was concerned about causing issues because of this change. In the end, it not as sensitive as changing the IP address of the server itself.

Regards,