i want to know about what is the impact of changing ip address of CCM 4.3 and hostname. also IPCCX application is running on same machine. what procedure should i have to follow to change the ip address without any impact on CCM and CRS application. either we need to build the machine again after doing that ?
You can change IP addresses. You will have an impact however. The systems will need to be restarted for the IP addresses to take affect. There are procedures for both products on CCO. It is a little more involved then just modifying the network configurations.
Note, you will not be able to change the host name without doing a complete system rebuild.
Regards, Bill Please remember to rate helpful posts.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...