Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Changing NTP server 5.13

I need to change NTP servers on my CCM5.13 install and cannot find where to do it. Anyone know off hand?

Thanks Ahead

Todd

2 REPLIES
Hall of Fame Super Red

Re: Changing NTP server 5.13

Hi Todd,

Can you try this method;

NTP Servers

Ensure that external NTP server is stratum 9 or higher (1-9). To add, delete, or modify an external NTP server, follow this procedure:

--------------------------------------------------------------------------------

Note You can only configure the NTP server settings on the first node or publisher.

--------------------------------------------------------------------------------

Procedure

--------------------------------------------------------------------------------

Step 1 From the Cisco Unified Communications Operating System Administration window, navigate to Settings>NTP Servers.

The NTP Server Settings window displays.

Step 2 You can add, delete, or modify an NTP server:

•To delete an NTP server, check the check box in front of the appropriate server and click Delete.

•To add an NTP server, click Add, enter the hostname or IP address, and then click Save.

•To modify an NTP server, click the IP address, modify the hostname or IP address, and then click Save.

--------------------------------------------------------------------------------

Note Any change you make to the NTP servers can take up to five minutes to complete. Whenever you make any change to the NTP servers, you must refresh the window to display the correct status.

--------------------------------------------------------------------------------

Step 3 To refresh the NTP Server Settings window and display the correct status, choose Settings>NTP.

--------------------------------------------------------------------------------

Note After deleting, modifying, or adding NTP server, you must restart all the other nodes in the cluster for the changes to take affect.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_1_1/iptpch4.html#wp1042131

Hope this helps!

Rob

Community Member

Re: Changing NTP server 5.13

Thanks, I figured it out right after the post. Now I need to change a hostname. Client changed the server name on me right after install. Im getting there though.

Todd

272
Views
5
Helpful
2
Replies
CreatePlease to create content