Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Changing TFTP address on a Cisco phone remotely

Hello, can we change the TFTP server address on a cisco 79xx phone remotely?

I know we can use the SEP<mac>.cnf file to configure, but can we also change the TFTP address using this file. The problem we have is we are changing the IP of our SBC and it requires the TFTP server to be configured on all the customers' phone. Instead we are planning to host a new SBC on the new IP address and push the configuration with new TFTP address to all phones, so when the phone reboots, it gets the configuration using the new SBC (which will forward the requests to the call manager). Please note we are not using Cisco Call Manager.

3 REPLIES
New Member

Re: Changing TFTP address on a Cisco phone remotely

Hello Happykiran.

Maybe a solution to your problem is to push the new tftp server address through DHCP option 66.

That way all you need is to configure that once on your DHCP server and not by hand on each phone.

Hope I understood your problem and this helps.

rGrds

G.K.

New Member

Re: Changing TFTP address on a Cisco phone remotely

George, thanks for that. But we don't have control over the DHCP servers of our customers. This appears to be a beautiful solution that we have never tried before. I will give it a try. But at the moment, as we don't have control over our customers' DHCP servers, can we push it using the SEP config file? I was wondering if we can add a XML tag in that file.

Cisco Employee

Re: Changing TFTP address on a Cisco phone remotely

I know of 3rd party tools but you need CUCM, not sure if someone has ever created one for non CUCM phones.

Phone Remote.

http://www.voipintegration.com/software.html

And no, you cannot configure the SEP file with TFTP, SEP file is exclusively phone config. The TFTP needs to be configured:

a) manually

b) DHCP

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1890
Views
0
Helpful
3
Replies