Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Check if a DDI number is reaching the gateway

Hi,

We have a problem with some DDI's just getting a dead tone when we call them. I'm fairly certain it is a problem at the telecom companies end but wanted to be sure. Is there a command I can use to view live calls hitting the gateway? I basically want to try dialling the numbers in question and see whether or not they are hitting our gateway.

Gateway is h.323 not MGCP.

Thanks

Steve

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Check if a DDI number is reaching the gateway

If you have a pri circuit "debug isdn q931" will show active calls. If not "debug voip ccapi inout" will get you plenty of info on inbound calls.

1 REPLY
Bronze

Re: Check if a DDI number is reaching the gateway

If you have a pri circuit "debug isdn q931" will show active calls. If not "debug voip ccapi inout" will get you plenty of info on inbound calls.

157
Views
0
Helpful
1
Replies