cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1181
Views
9
Helpful
6
Replies

Check time in remote Cisco IP Phone

ricardorojas123
Level 1
Level 1

In a Cisco Call Manager 6, How I can check the time displayed on the screen of the remote phones? I dont have physical access to the Cisco phones.

6 Replies 6

muzammel.haque
Level 1
Level 1

-

Message was edited by: muzammel.haque

Hi, you can use the Unified FX Phoneview Free Edition to serve your purpose.

You can get it from here: http://www.unifiedfx.com/

Hope this helps!

Thanks,

Mijanur Rahman

I will review, thanks

Another way to do this is create a user in call manager that you know the password for, then associate the remote phone(s) as controlled devices to that user you created.  From the Device > Phone page you can get the IP address of the remote phone, if it's a newer phone (7941/61/70 or newer) you can access http:///CGI/Screenshot.  The username and password you'll be prompted for will be the user above and you'll get a picture of the phone's screen so you can see the time.  If you want to check on an older phone 7940/60 let me know and I'll post that procedure since the image file will be in hex and will need to be converted.


Thank you very much Joseph :)

George Sotiropoulos
Cisco Employee
Cisco Employee

I usually check it via the web-interface of the phone. There you can find all kind of information: Status, Network, even Call details

Please rate if this helps

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: