CIMC web access

[Jean Lofrano]

Hey team,

I´m be able to ping CIMC, but the web access does not work.

can you help me please?

Thanks.

[David Perez]

Can you give us more information ?

is this a new configuration ? have you tried multiple web browsers ?

[Jean Lofrano]

Yes,

It is a new configuration..

UCS C220 M3

CIMC version 1.4 (7a)

I´ve tried in differents web browsers but it haven´t worked...

I´m be to ping the Ip address, but the web access is my problem.

[tzunt]

Hi Jean

I think I may be able to suggest a solution.  I had the identical issue for CIMC on four different UCS C210 M2 servers.  If I power cycled the UCS, CIMC would resume normal operation, but the workaround only lasted for a limited time.

I asked my partner to upgrade the CIMCs.  We are at versions 1.4(3k) & 1.4(3j) and no longer experience the issue at all.  This was a permanent solution for me, but I am concerned that your version appears higher than mine.

Lastly, I also found a method online to SSH into the CIMC and restart the web GUI which helped when I had the issue: (unfortunately I am not able to credit the original source, sorry)

Now assuming you have SSH enabled, you can use an SSH client such as PUTTY to SSH over, log in, and execute:

scope cimc

reboot

The session would look something like this:

login as: admin

admin@172.16.17.3's password:

sucs-c2xx# scope cimc

ucs-c2xx /cimc # reboot

This operation will reboot the CIMC.

Continue?[y|N]

It doesn't appear to impact or interfere with any applications or VMs which may be hosted on the UCS.

HTH

Tony

[yahsiel2004]

Jean,

Can you log into the CIMC via SSH and perform a "show http"

HTH

Regards,

Yosh

[Jean Lofrano]

Hey!!!

The problem has been solved... network conectivity..

thanks for help;