CIsco 2811 Gatekeeper command

[Curtis Fuentes]

                   Hi,

   I am working on my CCIE voice lab at home, but I am not able to enter the Gatekeeper command in my cisco 2811 routers. I am running IOS 12.4(15)

Thank you for the help in advance.

[Aman Soi]

Hi Curtis,

what is the image feature u are using?

you should have image like c2800nm-ipvoice_ivs-mz.124-23b.bin

regds,

aman

[Ayodeji Okanlawon]

Curtis,

Depending on what 12.4.15 release you are, this may be a license issue.. Please refer to this thread..

https://supportforums.cisco.com/thread/1002164

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

[Curtis Fuentes]

Is there any way to get this done without purchasing a license. This is for a lab environment not production.

Thank you

[Ayodeji Okanlawon · Accepted solution]

I believe you can get a demo license file from cisco..

https://supportforums.cisco.com/thread/2195933

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

[Curtis Fuentes]

Thank you

[Kevin Monteiro]

Hi Curtis,

Had a similar issue in my lab , I did want the license. Instead i downgraded the IOS and without the demo license.

The below IOS does not require gatekeeper license:

"flash:c2800nm-ipvoice_ivs-mz.124-4.T7.bin"

Cisco IOS Software, 2800 Software  (C2800NM-IPVOICE_IVS-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical  Support: http://www.cisco.com/techsupport
Copyright  (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 28-Nov-06 18:37 by  kellythw

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE  (fc1)

HQ uptime is 2 weeks, 4 days, 12 hours, 27 minutes
System  returned to ROM by reload at 07:28:44 PST Fri Jan 24 2014
System restarted at  07:29:49 PST Fri Jan 24 2014
System image file is  "flash:c2800nm-ipvoice_ivs-mz.124-4.T7.bin"

Kidnly rate the post accordinly.

Regards,

Kevin