Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2821 E&M - Philips Sopho S Integration Problem

Dear experts,

I am doing voice over IP PoC integrating Cisco 2821 to PABX Philips Sopho S using E&M module. My configuration and debug such as attached. the topology is as below :

(Analog Phone extension 27111) --- (Router 2821 FXS 0/1/0) --- (E&M port 0/1/0) ---- PBX ---- (Analog Phone extension 14032)

1. Call from PBX to router

PBX setting is to use 271xx in order to use the E&M trunk, but still I cannot receive digit from it. When I used connection PLAR 27111 at the E&M port 0/1/0, the call is established after I pressed 271 from the PBX Analog phone.

2. call from Router to PBX

I heard tone such as the number dialed is not known.

Is there anything that I missed or I can test?

Thanks for the help

Hasan

Everyone's tags (4)
222
Views
0
Helpful
0
Replies
CreatePlease login to create content