I recently purchased a 2851 for my home lab and it is running 15.1 advanced enterprice. I purchased a VIC2-FXO (which according to the docs that card is supported), and when I do a show diag it is being detected with no errors, however when I do a show run, it dows not show up and physically the card has 2 solid amber lights. This router does not have any DSP modules currently installed. I was hoping someone could tell me if this might me and IOS issues, though I though advanced enterprise did support voice cards, or simply something that can be resolved by adding DSP modules.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...