Cisco 2901 register with CUCM 7.0.1

[ma.romero]

Hi all,

I have a problem when I try to register my Cisco 2901 in CUCM 7.0.1, because in the CUCM doesn't appear the option to select the Cisco 2901, only cisco 2801.

Is it possible to register c2901 as c2801?

Thanks in advance.

Best Regards.

[Rob Huffman · Accepted solution]

Hi there,

Support for the 2900's was not added until CUCM 7.1(3). Sadly, you won't be able to configure

it as a 2801 either

Cisco 2901, 2911, 2921, and 2951

Interface Part Numbers

Onboard PVDM2 and PVDM3 DSPs

TDM Protocol or
Feature
Conferencing and transcoding

Minimum Cisco
IOS Software
Release
15.0.1M

Minimum Cisco
Unified
Communications
Manager Release
6.1.5, 7.1.3 or 8.0

http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf

Cheers!

Rob

[ma.romero]

Hi,

Many thanks for the information.

Best Regards