03-22-2010 05:22 AM - edited 03-15-2019 09:53 PM
Hi, we are in the process of upgrading all our gear and we currently run CUCM 6.1.1. We are looking at purchasing 2921 routers but my concern is that when I look in the Call Manager to add a Gateway there is no 2921 router. Do we need to upgrade CM for these to work or is there another way I can add these routers?
Thanks,
Linda
Solved! Go to Solution.
03-22-2010 05:26 AM
Hi Linda,
You would need to upgrade to CUCM 6.1(5)
Active Platforms
Cisco 2901, 2911,2921, and 2951
Minimum Cisco Unified Communications Manager Release
6.1.5, 7.1.3 or 8.0
From these good notes;
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
Cheers!
Rob
03-22-2010 05:26 AM
Hi Linda,
You would need to upgrade to CUCM 6.1(5)
Active Platforms
Cisco 2901, 2911,2921, and 2951
Minimum Cisco Unified Communications Manager Release
6.1.5, 7.1.3 or 8.0
From these good notes;
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
Cheers!
Rob
03-24-2010 10:44 AM
Thanks for the info Rob!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: