Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
dm
Community Member

cisco 3845, h323-isdn pri, reverese caller id

Hello!

I run mixed voip network, with several h323-isdn pri gateways.

Some of these gateways are cisco, some asterisk.

I configured one of asterisk gateways according to

http://www.voip-info.org/wiki/view/Asterisk+func+CONNECTEDLINE

so if I do call in following scheme:

PBX1--pri--asterisk1--h323--asterisk2--pri--PBX2

once PBX1 user accept call user on PBX receives user's name from PBX1.

but if I do call in

PBX1--pri--asterisk1--h323--cisco3845--pri--PBX2

There is no user name.

Asterisk sends name as informational element, I see it in traffic dump.

What I need to configure on cisco , so it will transfer this element to PBX2?

Thank you!

118
Views
0
Helpful
0
Replies
CreatePlease to create content