Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 4451 and NIM-4MFT-T1/E1 and NIM-8MFT-T1/E1

Hello guys


I'm trying to configure e1 r2-digital in this product but don't show me the option:


hostname(config-controller)#ds0-group 0 timeslots 1-15,17-31 type ?
  e&m-delay-dial       E & M Delay Dial
  e&m-immediate-start  E & M Immediate Start
  e&m-melcas-delay     MEL CAS (CEPT) E & M Delay Start
  e&m-melcas-immed     MEL CAS (CEPT) E & M Immediate Start
  e&m-melcas-wink      MEL CAS (CEPT) E & M Wink Start
  e&m-wink-start       E & M Wink Start
  fxo-ground-start     FXO Ground Start
  fxo-loop-start       FXO Loop Start
  fxo-melcas           MEL CAS (Mercury) FXO
  fxs-ground-start     FXS Ground Start
  fxs-loop-start       FXS Loop Start
  fxs-melcas           MEL CAS (Mercury) FXS


I did the upgrade for the latest IOS version and same problem.

Can you help me?


System image file is "bootflash:isr4400-universalk9.03.13.00.S.154-3.S-ext.SPA.bin"

cisco ISR4451-X/K9


NAME: "NIM subslot 0/2", DESCR: "NIM-8MFT-T1/E1 - T1/E1 Serial Module"
PID: NIM-8MFT-T1/E1    , VID: V01, SN: FOC18103CNE

NAME: "NIM subslot 0/3", DESCR: "NIM-4MFT-T1/E1 - T1/E1 Serial Module"
PID: NIM-4MFT-T1/E1    , VID: V01, SN: FOC174194C4


Thank you

Everyone's tags (1)