I have a 7960 running the SIP FW, and I have 2 7914's to attach to it. Are the rumour's correct that they don't work when using SIP. If they do can someone tell me how to get them to work properly. Do they require different software loaded to work in the SIP enviroment? and do I just browse to the phone to enter the monitored extension details? any help would be appreciated.
With what do you plan to use them? Seems that will not be a cisco solution, so you may find that the 7960+7914 won't work. The "right" software to run would be SCCP. Finally, assigning extension is not done with a web browser, but by the softswitch itself.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...