Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 7925g Connection failed

Hello ,,

After configuring VoWLAN as per the following document:

Voice over Wireless LAN 4.1 Design Guide

and adding a network profile on the 7925g wireless phone . I still get connection failed .

For those who had faced this issue before please comment any propable troubleshoot for this .

This issue is delaying a project delivery, so its urgent

Thanks all

Hall of Fame Super Gold

Cisco 7925g Connection failed

Describe your WLAN configurations and settings.

What is the error message when the phone tries to connect?

New Member

Cisco 7925g Connection failed


Further to what Leo has said:

What model of the 7925G are you using specifically? eg. CP-7925G-A-K9, CP-7925G-W-K9, CP-7925G-E-K9 etc

What country is the phone being deployed into?

if it is a W model, the AP will need world mode configured on the Dot11Radio interface to register with the network.

conf t

int Dot11Radio1

world-mode dot11d country XX (both, indoor, outdoor)


It sounds like an identical issue I dealt with last week, and this solved the issue. Also check obviously the phone has the correct SSID (case sensitive) and password, as well as security mode.



Cisco Employee

Cisco 7925g Connection failed

Thanks Nic. The command fixed my issue.

New Member

Cisco 7925g Connection failed

You're welcome, glad I could help.

New Member

Cisco 7925g Connection failed

Hi Nic,

How can I configure interface dot11 on lightweight access point??