Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 7937g conference in CUCME

i have cisco ip conference station 7937g

http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-conference-station-7937g/product_data_sheet0900aecd806e021a.html

 

I have already registred this station in CUCME and make calls

But when you press "Conf"  button, nothing happens, cant initial Conference

All ohter sccp and sip phones can initiate conference

 

In cme config:

ephone-dn  8
 number 6409
 label Conference
 name Conference
 hold-alert 30 originator

 

ephone  8
 mac-address <mac-address>
 keep-conference
 button  1:8

 

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Hi.Are you try to conference

Hi.

Are you try to conference an incoming call with conference button?

You can give a look to this bug https://tools.cisco.com/bugsearch/bug/CSCuh72935

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
VIP Gold

Can you change the

Can you change the configuration as below and then test..

ephone-dn  8 dual-line
 number 6409
 label Conference
 name Conference
 hold-alert 30 originator

 

ephone  8
 mac-address <mac-address>
 conference drop-mode creator
 conference add-mode creator
 type 7937
 keep-conference
 button  1:8

 

Suresh

9 REPLIES

Hi.Are you try to conference

Hi.

Are you try to conference an incoming call with conference button?

You can give a look to this bug https://tools.cisco.com/bugsearch/bug/CSCuh72935

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
New Member

Incoming calls with

Incoming calls with conference are working but 7937 cannot initiate conference when i try conf button press

New Member

#show ephone 7937ephone-8[7]

i load last firmware file cmterm-7937-1-4-5-7-SCCP.cop.sgn 

load 7937 cmterm-7937.cop.sgn

But its not helps me((

VIP Gold

Can you change the

Can you change the configuration as below and then test..

ephone-dn  8 dual-line
 number 6409
 label Conference
 name Conference
 hold-alert 30 originator

 

ephone  8
 mac-address <mac-address>
 conference drop-mode creator
 conference add-mode creator
 type 7937
 keep-conference
 button  1:8

 

Suresh

New Member

Thanks for answerGive me a

Thanks for answer

Give me a minute and I'll let you know if that helped or not

New Member

conference drop-mode creator

conference drop-mode creator
 conference add-mode creator

Thanks it helps me Conf button are working now but only two participants can use conference  . Third listen music

But other phones can initiate conference with three and four  participants

 

Maybe need to add an additional parameter?

Hi.Under Telephony service,

Hi.

Under Telephony service, which parameter for "max-conference and max-sessions" did you defined?

 

Let us know

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
New Member

#show telephony-serviceCONFIG

i restart ip phone conference station and its worked!

Thanks for help all!

VIP Gold

Good to know that :-) Suresh

Good to know that :-)

 

Suresh

80
Views
0
Helpful
9
Replies
CreatePlease login to create content