Hello I am implementing a new 8.0 UCM system with 2 UCM servers. I have installed many systems and the configuration is valid but some phones after a period of time seem to be able to only register to the publisher and thinks that its SRST reference is its default gateway (which is a switch). The SRST reference on the device pool is currently disabled. And for some reason deleting the ITL, and CTL file and reseting the phone in UCM seems to fix the issue. But after a period of time the phone will "break" its configuration.
Symptoms of a "broken" phone are as follows:
No access to personal / Corporate directory says HOST NOT FOUND
If the Publisher goes down the phones will not fail over because it thinks its SRST reference is its Default Gateway and has no knowledge of the Subscriber
No access to any configured phone services.
under Settings > Device config > Locale > it says Local version "Built-In" Where the others show 220.127.116.11(5)
All the phones are the same model, were added the same way (TAPS) and are in the same device pool, running SCCP45.9-0-3S for the phone load.
I'm thinking to downgrading/upgrading the phones to a different version. Does anybody have any suggestions or a better phone load to use?
I have checked the DB replication status and everything checks out okay. I downgraded the phones to SCCP45.9-0-2-SR2S and I havent seen the issue happen again. But for some phones they do not get the new phone load. They still have the "host not found" issues. The only way I get them to work is to delete the CTL / ITL file which then causes it to contact the TFTP server and triggers the new firmware download.
I'm almost wondering if I am running into a possible bug either with the phone load versions or with my call manager version in regards to the ITL / CTL files.
Did you get this fixed? This is happening with a recent upgrade from 7.1.5 to 8.5.1 and then a backup/restore onto a virtual machine. I too can delete the CTL/ITL and phone can use the corporate directory and the subscriber is the primary call processing server.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...