cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
826
Views
0
Helpful
5
Replies

CISCO 7945G firmware upgradation

mrfcisco1
Level 1
Level 1

Can anybody explain the procedure to upgarde the firmware of 7945G. I have the firmware after uploading firmware to CUCM which load ID i have to mention in the load ID column in phone page?? or i have to configure the same in the device default page ?? also request you to tell me the difference between boot load ID and application load ID... Thanks in advance..

2 Accepted Solutions

Accepted Solutions

Gajanan Pande
Cisco Employee
Cisco Employee

After you upload the firmware to CUCM for any phone, the phone load value will be automatically updated in Device Default page for that phone type, you dont need to manually key in the value.

Pls rate helpful posts.


GP.

View solution in original post

5 Replies 5

Thanx Lebedev.. appreciate your help..

Gajanan Pande
Cisco Employee
Cisco Employee

After you upload the firmware to CUCM for any phone, the phone load value will be automatically updated in Device Default page for that phone type, you dont need to manually key in the value.

Pls rate helpful posts.


GP.

gajanan pande, Thank you so much for your kind information..

happy to help with piece of info.

Happy holidays !!

Cheers !!

GP.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: