Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO 7945G firmware upgradation

Can anybody explain the procedure to upgarde the firmware of 7945G. I have the firmware after uploading firmware to CUCM which load ID i have to mention in the load ID column in phone page?? or i have to configure the same in the device default page ?? also request you to tell me the difference between boot load ID and application load ID... Thanks in advance..

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member
Cisco Employee

CISCO 7945G firmware upgradation

After you upload the firmware to CUCM for any phone, the phone load value will be automatically updated in Device Default page for that phone type, you dont need to manually key in the value.

Pls rate helpful posts.


GP.

5 REPLIES
New Member
New Member

CISCO 7945G firmware upgradation

Thanx Lebedev.. appreciate your help..

Cisco Employee

CISCO 7945G firmware upgradation

After you upload the firmware to CUCM for any phone, the phone load value will be automatically updated in Device Default page for that phone type, you dont need to manually key in the value.

Pls rate helpful posts.


GP.

New Member

CISCO 7945G firmware upgradation

gajanan pande, Thank you so much for your kind information..

Cisco Employee

CISCO 7945G firmware upgradation

happy to help with piece of info.

Happy holidays !!

Cheers !!

GP.

537
Views
0
Helpful
5
Replies