Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 7961 Help -->SIP newbee here! please help

Hi all i just got a 7961 from my company, there are getting new model so i asked for 1 so i can start learning on this... i'm trying to set this phone so i can get it conected to my VoIP server. i'm been doing some search but with out any luck... well not that much.. i was able to creat my on TFTP and i was able to change the firmware... i use to have:

loadfile: sccp41.8-2-1s

bootload id: 7961g_64-02070631AMD64megRel.bin

and i change it to:

loadfile: term61.defaul

bootlad id: same

so i don't know if i'm doing it the right way.. i know that now i have SIP configuration.. but i can edit it at all... all i get is the msg "Unprovisioned" all i'm trying to do is to be able configure my sip information...

i'm running or pointing my tfpt to a floder called cmterm-7941_7961-sip.8-3-1 it has 8 files on it...

Can some one help me or point me to a place where i can get more info.. i'm stuck in here...

Thanks in advances!

Everyone's tags (3)
7 REPLIES
New Member

Cisco 7961 Help -->SIP newbee here! please help

I forgot to mention i'm trying to use it a stand alone phone...

Hall of Fame Super Silver

Cisco 7961 Help -->SIP newbee here! please help

What is your VoIP server?

Chris

New Member

Cisco 7961 Help -->SIP newbee here! please help

Hi and thanks for replying! My server is a Online company: voip.ms

New Member

Cisco 7961 Help -->SIP newbee here! please help

Anyone available to help me out??

Cisco 7961 Help -->SIP newbee here! please help

I haven't done what you are asking but the firmware you list isn't recognizable to me. Of course, it the right firmware was renamed then that could explain it. Anyway, you may want to verify you have the right firmware.

Cisco has a detailed guide on converting a 7960:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

Also, the voip.ms wiki has UA configuration information.

http://wiki.voip.ms/article/Cisco_IP_Phone_7940/7960

I didn't find similar docs (with the same level of detail, that is) for the 7961. However, the basic concepts are the same but the interface (i.e. menu structure) is different.

HTH.

Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Cisco 7961 Help -->SIP newbee here! please help

Hi All I finally manage to get a smartnet contract. i was able to upgrade my 7961G firmware, now i have 9.3 sip version on it.. i was able to "configure the sep.cnf.xml file with my VOIP server information but the phone is not registering at all... is there anything suggestion???

Hall of Fame Super Gold

Cisco 7961 Help -->SIP newbee here! please help

For using Cisco phones with third-party servers, you will find more information on sites like voip-info.org than here.

Otherwise if you want sure and quick results, get a phone from the small business like, Linksys, etc.

1707
Views
0
Helpful
7
Replies
CreatePlease to create content