I'm working with a CUCM 7.1, Cisco Unity 4.0 and a couple of Cisco 7965s with 7915 modules..
I have a couple of 7965 phones sharing a directory number on the second button, the first button have other directory numbers assignes to them (the users personal directory numbers) .
The shared line mentioned above is on a "day schedule" partition. The same directory number is also on a "off hours schedule" partition sending all calls to voice mail from 5:00 PM to 8:00 AM, this DN is beign used by a CTI.
Now to the actual problem - The MWI envelope that flashes on the display when there's new messages will not clear up, the users will clear the voice mails and the red light on the handset will clear but not the envelope.
I have checked the settings in the DN config, and everything appears properly set.
Could someone give me an idea as to what could be causing this little problem?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...