Hi, I have a 7970G and I can?t seem to get it to connect to my VOIP Via Talk. The registration credentials are all perfect. I'm also running SIP70.8-0-2SR1S which does not have the random high udp port request security feature that the newer versions do. I believe my config file is bloated and has unnecessary of conflicting tags that are causing the phone to not be able to register. Can anyone confirm this and possibly show/tell me what to remove/add.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...