Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 887VA-V-W-K9 License

Hello,

 

I've bought an Cisco 887VA-V-W, I can't activate the voice part of the ISR. I've accept the license end user agreement, reload the router but nothing works,

Here is the show ver :

 

ISR-TEST#sh version 

Cisco IOS Software, C880 Software (C880VOICE-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Thu 20-Jun-13 16:56 by prod_rel_team

 

ROM: System Bootstrap, Version 15.1(2r)T3, RELEASE SOFTWARE (fc1)

 

ISR-TEST uptime is 1 day, 2 hours, 1 minute

System returned to ROM by reload at 14:14:13 UTC Mon Mar 17 2014

System restarted at 14:15:13 UTC Mon Mar 17 2014

System image file is "flash:c880voice-universalk9-mz.152-4.M4.bin"

Last reload type: Normal Reload

Last reload reason: Reload Command

 

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

Cisco 887VA-V (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.

Processor board ID FCZ174990TU

 

1 DSL controller

1 Ethernet interface

4 FastEthernet interfaces

1 Gigabit Ethernet interface

3 ISDN Basic Rate interfaces

1 ATM interface

1 terminal line

1 Virtual Private Network (VPN) Module

4 Voice FXS interfaces

1 DSP, 16 Voice resources

1 cisco Embedded AP (s)

256K bytes of non-volatile configuration memory.

250880K bytes of ATA CompactFlash (Read/Write)

 

 

License Info:

 

License UDI:

 

-------------------------------------------------

Device#      PID            SN

-------------------------------------------------

*0        C887VA-V-W-E-K9       FCZ174990TU     

 

 

 

License Information for 'c880-srst'

    License Level: advipservices   Type: Permanent

    Next reboot license Level: advipservices

 

 

Configuration register is 0x2102

 

And here the show license :

 

ISR-TEST#sh license 

Index 1 Feature: advipservices                  

    Period left: Life time

    License Type: Permanent

    License State: Active, In Use

    License Count: Non-Counted

    License Priority: Medium

Index 2 Feature: SSL_VPN                        

    Period left: Not Activated

    Period Used: 0  minute  0  second  

    License Type: EvalRightToUse

    License State: Not in Use, EULA not accepted

    License Count: 0/0  (In-use/Violation)

    License Priority: None

Index 3 Feature: ios-ips-update                 

    Period left: Not Activated

    Period Used: 0  minute  0  second  

    License Type: EvalRightToUse

    License State: Not in Use, EULA not accepted

    License Count: Non-Counted

    License Priority: None

 

ISR-TEST#

 

The ISR is regitered with my CUCM (v 7.1.5) but the voice Bri stay unregistered.

If someone as an idea on how to use the voice BRI on the ISR.

 

Regards,

Mathieu

  • IP Telephony
6 REPLIES
VIP Purple

Hi Mathieu, what is the

Hi Mathieu,

 

what is the protocol u are using for regsitering with CUCM?

if using MGCP, try H.323. there is a bug associated 

Unable to register both BRI ports of C887VA-V using MGCP
CSCuj54849
Symptom:
BRI/S0/SU0/P2 does not register successfully.

Conditions:
Using MGCP to register C887VA-V ports to CUCM

Workaround:
Use H.323 instead of MGCP

 

regds,

aman

VIP Purple

Hi Mathieu,

New Member

Hi Aman,Thanks for all your

Hi Aman,

Thanks for all your replies, i finally setup my ISR with H323 and everything is working. I'm waiting to see if there is a solution to use MGCP.

 

Regards

VIP Purple

Hi Mathieu,there was a recent

Hi Mathieu,

there was a recent discussion on same issue and issue has not been resolved even with CUCM 10

 

https://supportforums.cisco.com/discussion/12149611/unable-register-both-bri-ports-c887va-v-using-mgcp-bug-cscuj54849

 

regds,

aman

New Member

Hi aman,thanks for your reply

Hi aman,

thanks for your reply. I use MGCP for the gateway, I'll try to set up H323 to see if it's work.

Do you know when MGCP will be supported by the 887VA? Do you think I can use SCCP for the ISR?

 

Regards,

Mathieu

VIP Purple

Hi Mathieu,

Hi Mathieu, I have checked the datasheet and says that SCCP is supported under Call-Control signalling. http://www.cisco.com/c/en/us/products/collateral/routers/887-integrated-services-router-isr/data_sheet_c78_459542.html regds, aman
242
Views
0
Helpful
6
Replies