1. i have enabled pickup group in sip extensions as well as SCCP extensions , my pickup option is working but when i try to pickup from the sip phone it doesnt show who is calling(basically caller id) it shows only the pickup group number 1 . how to solve this issue.
2. the extension monitor option in sip 8961 phones with the expansion module(CKEM). like SCCP Phone which has monitor extension option to find the status of the user. will that possible in 8961 sip phone.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...