If the ATA is sccp configured, then you should be looking at the following options on the http:/// page:
EPID0orSID0 -> Line 1 or Port 1 and EPID1orSID1 -> Line 2 or Port 2
SIDx specifies whether to enable the Phone 1 and/or Phone 2 ports on the Cisco ATA to register with Cisco Call Manager. (EPIDx is not for SCCP.) SIDx can be one of the following values:
1. 0- Disables port; port does not attempt to register with Cisco CallManager
2. 1 enables port; port will attempt to register with Cisco CallManager
If auto registeration is not enabled, then you will add the 2nd port of the ATA, check the following example: For example, if the MAC address of the Cisco ATA is 00012D01073D, then SID0 is 00012D01073D and SID1 is 012D01073D01.
So the MAC for the 2nd port would be 012D01073D01, that is the first to values will bw added as 01 in the end of the MAC.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4